Tasks:
Apply, level and smooth coats of plaster
Cure freshly plastered surfaces
Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
Finish corners and angles and create decorative designs in finish coat, if required
Measure, cut, fit and install drywall sheets
Mix plaster ingredients to desired consistency
Mould and install ornamental plaster panels, cornices and trim
Position and secure sheets to metal or wooden studs or joists
Smooth out excess compound and allow coat to dry
Spray acoustic or texture materials over walls and ceilings
Tape over joints using taping machine and embed tape in compound
Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
Attach metal or gypsum lath to studs or furring
Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
Install corner beads and wire mesh around beams to which plaster is to be applied
Install exterior and interior steel studs
Install vapour barriers and thermal and sound insulation
Prepare wall and ceiling layouts
Estimate costs and materials
Additional information
Work conditions and physical capabilities
Bending, crouching, kneeling
Handling heavy loads
Large workload
Manual dexterity
Physically demanding
Repetitive tasks
Who can apply to this job?
Only apply to this job if:
You are a Canadian citizen, a permanent or a temporary resident of Canada.
You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
By email
silvershinepainting@mail.com
Include this reference number in your application
20240327
How-to-apply instructions
Here is what you must include in your application:
Job reference number
This job posting includes screening questions. Please answer the following questions when applying:
Are you currently legally able to work in Canada?
|